+44(0) 1525 863 942 enquiries@oilpoll.com

OPS Interceptor & Hazardous Waste Recycling

OPS Interceptor & Hazardous Waste Recycling

OPS have 10 years of experience in the treatment of hazardous interceptor waste and similar (130508 etc).

A customer would still need to decide whether they want to choose to treat low hazardous waste such as petrol forecourts (approx. <3% oil) or move to all hazardous wastes. These wastes are obviously hazardous and whilst some of the below would be option for non-hazardous treatment plants the following is required for these plants:

  • Properly designed received pits/tanks
  • Sand scrubbing
  • Thickener with oil separation capability
  • Water treatment with oil separation capability
  • Oil storage and decanting

 

Sand which is received from interceptor waste will not be cleaned to the WRAP inert protocol which just a cyclone and dewatering bed – more attrition is required hence the OPS sand cleaning expertise comes in.

The OPS Thickener with a separate oil take off is also required to give another collection point of slop oil. This unit occupies only 3m diameter footprint but can handle all you site fines.
The OPS water treatment is Electrocoagulation and DAF which effortlessly rips the oil from water and gives another collection point for the oil.
Whether a client just chooses to ship the oil off site at this point is their decision otherwise it can be further treated to give a zero or positive cost rather than a negative.

 

RECOVERED STONE

Sold as an aggregate

RECOVERED SAND

Sold as a fine aggregate/sand

RECOVERED FINES

Dewatered and disposed off for soil amelioration projects

RECOVERED OILS

Disposed off to oil recycling facility

Energy Efficiency = Reduced Wear.

OPS design our plants with the following features:

 

  • Zero ’90-degree’ elbows on pipes transporting sand and water
  • Zero ’90-degree’ elbows at the outlet of pumps
  • Recirculation pump controlled by flowmeters and a pressure sensor to reduce energy consumption
  • Accurate control of sludge flowrate to ensure smooth and efficient centrifuge operation
  • To strive to be water neutral by capturing, treating and reusing all the water which comes into a site

As engineering systems integrators, we combine cost efficient 'off the shelf' products with our high throughput proprietary processes. Integrated by best in class process control into a single solution individually engineered to site conditions, OPS deliver consistent performance, reliability and optimised life cycle costs.

Oil Pollution Services Ltd.
Building 52, Wrest Park Enterprise Centre,
Silsoe, Bedfordshire
MK45 4HS

enquiries@oilpoll.com

+44 (0) 1525 863 942

Privacy Policy